Runco XtremeProjection X-200i Especificações descarregar pdf (Página 84)

Operation

68 Runco X-200i Series Installation/Operation Manual

PRE

IMINAR

White Balance: To precisely adjust the white point associated with the custom color

gamut, choose White Balance from the PCE sub-menu. These controls operate identically

to the Gain controls in the

RGB Adjust menu (described on page 66).

System Use the controls in the System menu, shown in Figure 4-10, to change the display

orientation and perform other, common installation tasks.

Figure 4-10. X-200i System Menu

Menu Settings: Select Menu Settings from the System menu to customize the OSD

menu appearance and behavior, as follows.

• Language: Select Language from the Menu Settings menu to change the OSD

language. Refer to Changing the OSD Language on page 38 for detailed

instructions.

• Menu Position: Select Menu Position from the Menu Settings menu to change the

OSD menu position. The default setting is Center.

• Menu Transparency: Select Menu Transparency from the Menu Settings menu to

adjust the degree of translucence (show-through) in the menus and message boxes.

0% means that the menus are opaque. The default setting is 25%.

• Menu Display Time: Select Menu Display Time from the Menu Settings menu to

specify how long the OSD menu remains on-screen after any key presses. The default

setting is 30

Seconds.

• Message Boxes: When you select a new input source or turn the projector off, or

when an error occurs, the X-200i briefly displays an on-screen message confirming

your action or briefly describing the error. To prevent the display of these messages,

select

Message Boxes from the Menu Settings menu to and set it to Off.

➤

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 117 118

Sem comentários

Runco XtremeProjection X-200i Especificações Página 84